Aqua Computer - Aquatube rev. 1.1

The liquid within the water cooling is constantly subjected to temperature variations which is why the water expands and contracts to a certain degree depending on the CPU load. To avoid air bubbles in the system the aquatube was developed. Aqua computer offers two different water reservoirs. The simple version is the aquainlet. It is simply attached to the suction nozzle of the pump which significantly simplifies the filling of the system. The aquainlet is available in plexiglas or anodized aluminium. The water reservoir in its perfected form though is the aquatube. It offers, besides the connectors for the water in- and outlet, the possibility to integrate a temperature probe, an aquajet and even an illumination module. This reservoir can be mounted inside the computer, in the top and in the front of the case. This truly makes the aquatube the window of the water cooling to the exterior world.

The aquatube is a reservoir you can't imagine any more practical. It can be filled effortlessly through its large opening and it also offers optimal control possibilities for the rate of flow. The aquatube has five threads each on the top and on the bottom, which allows for easy mounting to the case. The aquatube is completely leak-proof and thus can be mounted in every position. With this reservoir the filling turns into child's play. Next to the excellent functionality of the container it shines with a special design. The aquatube is lathed and milled from 1 kg aluminium.
The new revision 1.1 offers 3 additional G1/8" threads on the bottom, offering further possibilities to attach connectors, temperature probes or illumination modules.

Technical data aquatube rev. 1.1

Measurements and weight
Height 70mm, diameter 79mm, volume approx. 160 cm³, weight with straight connectors approx. 500 grams

Anodized aluminium, completely CNC-made
Lid - Plexiglas GS, 5 mm

Connector variations - straight connector (plug&cool) for 8/6mm hose

- bent, turntable connector (plug&cool) for 8/6mm hose

- pneumatic connector for 8mm hose

All necessary mounting hardware, Mounting Bracket is not included and is available separately

AC Light mod for aquatube UV or Blue - (sold separately)

AC Mounting Bracket 100mm x 100mm x 2mm- (sold separately)

AC Aquabay - fits into 2 x 5.25" Spare front bays- Holds the aquatube rev 1.1 and aquastream (sold separately)

AC Aquajet for the auqatube rev1.1 produces a cascading water effect against the clear plexiglas fill window. (sold separately)